Alloy 20 is a nickel-iron-chromium alloy
with some amounts of copper and molybdenum. The nickel in this alloy makes
it resistant to chloride-ion stress-corrosion cracking. On the other hand,
copper and molybdenum make it resistant to reducing environments and also
provide good resistance to pitting and crevice corrosion. The chromium makes
it suitable for work with chemicals like nitric acid, by adding resistance
to oxidizing environments. The molybdenum, is also essential for this alloy
as it helps to reduce the effect of carbide precipitation during welding and
thereby increasing alloy's resistance to intergranular corrosion.
INCO alloy 20 is extremely resistant to corrosion in sulfuric acid
environments and hence finds utility with this acid as well as in production
of gasoline, solvents, explosives, inorganic and organic chemicals etc. In
case of other application, INCO alloy 020 is easily prepared to produce
mixing tanks, heat exchangers, process piping, pickling equipment, pumps,
valves, fasteners and fittings. We offer wide range of
alloy 20 like
alloy 20 pipe, alloy 20 tee, alloy 20 plate, alloy 20 seamless pipes, alloy
20 sheet, alloy 20 round bar, alloy 20 tube,
alloy steel and
many more.
Chemical Analysis of Alloy 20
| C |
Ni |
Mo |
Co |
Ir |
M |
Cr |
Si |
Su |
Ti |
Al |
Pho |
| .19.00-21.00 |
32.00-38.00 |
2.00-3.00 |
3.00-4.00 |
Bal. |
2.00max |
0.07max |
1.00max |
0.035max |
|
|
0.045max |
Specifications
| Alloy 20 Plate / Sheet |
Alloy 20 Round Bar |
Alloy 20 Pipes |
Alloy 20 Tube |
Alloy 20 Fittings |
Alloy 20 Forgings |
| SB- B162 / B160 |
SB- B162 / B160 |
SB- B161 / B725 |
|
SB- B366 |
SB- B564 |
Titanium Grade 2 ( Titanium Gr2) has moderate strength
with excellent cold formability, weldability. This titanium also has
excellent resistance to high oxidization. Our range of
titanium Gr2 and
titanium Gr5 available in various forms like fasteners, cap, elbow, erw
pipes, reducer, round bar, tee, tube, seamless pipes, welded pipe, seamless
tube, welded tube, bar, wire, sheet, plate, forgings, pipe fittings and
flanges.
Our range of titanium are titanium gr.2 seamless pipes, titanium gr.5 erw
pipes, titanium gr.2 round bar, titanium gr.5 flange, titanium gr.2
fittings, titanium gr.5 tee, titanium gr.2 elbow, titanium gr.5 reducer,
titanium gr.2 cap, titanium gr.5 fasteners, titanium gr.2 sheet, titanium
gr.5 plate, titanium gr.2 tube etc.
Also manufacturers tungsten pipe, tungsten plate, tungsten round bar,
tungsten sheet and tungsten tube.
Our tungsten like tungsten round bar, tungsten sheet, tungsten plate,
tungsten pipe, tungsten tube are four times harder than titanium products.
Tungsten tubes are mainly used for spinning thin tube materials and
special purposes.
Chemical Analysis of CP Titanium Grade 2 (Titanium Gr2)
| C |
N |
O |
H |
Si |
Cr |
Ni |
Mo |
Cu |
Co |
Cb+Ta |
Ti |
Al |
Fe |
Nb |
other |
| .08 max |
.03 max |
.25 max |
.015 max |
|
|
|
|
|
|
|
bal |
|
.30 max |
|
|
Specifications
| Titanium Sheet / Titanium Plate |
Titanium Round Bar |
Titanium Pipe |
Titanium Tube |
Titanium Fittings |
Titanium Forgings |
| ASME SB-265 / AMS 4902 |
ASME SB-348 / ASTM F-67 / AMS 4921 |
ASME SB-337 / ASME SB-338 |
ASME SB-337 / ASME SB-338 / AMS 4942 |
ASME SB-363 |
ASME SB-381 |
Product
Range
© Regent Steel & Engg. Co.. All Rights Reserved (Terms
of Use)
+(91)-(22)-23884555
